Centova Technologies Forum
Centova Cast v3 => Bugs and issues => Topic started by: Mark Carney on January 21, 2012, 12:22:55 pm
-
Hi can anyone shed some light on how to correct the below issue please as unable to get installation working on a new server. :'(
===== Installation Complete ==============================================
To complete your installation, please launch the web interface at:
http://server-ip:2199/
NOTE:
- icecast did not install successfully and will NOT be available for use
To try again, run: /usr/local/centovacast/sbin/update --add icecast
Thank you for using Centova Cast.
Going to web page shows: CCD-ERR bad request
[root@~]# /etc/init.d/centovacast status
cc-web: not running
cc-control: running (pid 5685)
cc-appserver: running (pid 5390)
cc-ftpd: not running
cc-imaged: not running
[root@~]# /etc/init.d/centovacast restart
Stopping Centova Cast: cc-ftpd (not running) cc-web (not running) cc-appserver cc-control cc-imaged
Starting Centova Cast: cc-control cc-appserver cc-web [emerg]: bind() to 0.0.0.0:2199 failed (98: Address already in use)
[emerg]: bind() to 0.0.0.0:2199 failed (98: Address already in use)
[emerg]: bind() to 0.0.0.0:2199 failed (98: Address already in use)
[emerg]: bind() to 0.0.0.0:2199 failed (98: Address already in use)
[emerg]: bind() to 0.0.0.0:2199 failed (98: Address already in use)
[emerg]: still could not bind()
- failed
cc-control
I have done my install and un-installed as per below
**** INSTALL BETA V3 CENTOVACAST ****
[root@~]# wget -O install.sh install.centova.com/LICENCEKEY
[root@~]# chmod a+x ./install.sh
[root@~]# ./install.sh --shoutcast-all --icecast-all --channel=unstable
**** UNINSTALL BETA V3 CENTOVACAST ****
[root@~]# /etc/init.d/centovacast stop
[root@~]# rm -f /etc/cron.d/centovacast /etc/init.d/centovacast /etc/centovacast.conf
[root@~]# rm -rf /usr/local/centovacast
[root@~]# userdel centovacast
[root@~]# userdel ccuser
*** MYSQL ***
Not got to database creation so nothing to remove!
Doing a lsof -i:2199 shows
[root@~]# lsof -i:2199
lsof: no pwd entry for UID 10011
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
lsof: no pwd entry for UID 10011
castd 2611 10011 3u IPv4 18110 0t0 TCP *:onehome-help (LISTEN)
***EDIT***
Forgot to add server software versions. ;)
[root@~]# cat /etc/*release*
CentOS release 6.2 (Final)
CentOS release 6.2 (Final)
CentOS release 6.2 (Final)
cpe:/o:centos:linux:6:GA
[root@~]# php -v
PHP 5.3.3 (cli) (built: Jan 11 2012 19:53:01)
Copyright (c) 1997-2010 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies
with the ionCube PHP Loader v4.0.7, Copyright (c) 2002-2011, by ionCube Ltd.
[root@~]# mysql -V
mysql Ver 14.14 Distrib 5.1.52, for unknown-linux-gnu (x86_64) using readline 5.1
-
V3 is currently unsupported and on hold. I'd download v2 and get it going before v3.
As you can see its in Beta (and no changes since March of 2011)
-
Thanks for the reply ;)
Unfortunately looks like I am stuck for the next four days as I reissued my licence when I changed server and then after the above error and remembering the licensing issues when I last tried in 2011 I did another reissue this has now resulted in the following when trying to go back to V2.
You have exceeded the maximum of 3 reissuances in a 96-hour period.
So that's that then for four days :(